95 Series

95-405-C
Extra Chime for 95-405

95-405
INFRARED DOOR ANNOUNCER
This door announcing device emits a continuous, invisible infrared beam to the reflector and returns it to the receiver. When this beam is interrupted it will announce the entrance of the customer by a pleasant chime or alarm sound (via selector switch). Single-ended detection technology eliminates the need for a separate transmitter and receiver. An alignment LED is provided for fast and easy installation. Features: All parts included for easy, complete installation. Maximum detection range of 35 feet. Two-chime maximum hook-up. On-Off switch in-line. U.L. Listed transformer provided. 35 foot length of AWG #22 wire provided. Operating voltage of 6 Vdc. Current consumption of 70 mA armed, 1.2 amps alarmed. 95-405-C (EXTRA CHIME SOLD SEPARATELY)

95-455
INFRARED & MICROWAVE MOTION DETECTOR
Our most advanced motion detector using an infrared sensor to pickup thermal energy and a microwave detector to detect physical motion. This detector incorporates a new sensing circuit to process both technologies to provide a reliable triggering sensor for security systems. Features Microwave/PIR technology, single edge PIR triggering and L.E.D. indicators for IR detection, microwave detection, and alarm triggering. Operates from 6-15Vdc, current draw 35mA. N/C dry contacts 28Vdc, 125mA. Protection coverage 35’ long x 35’ wide. Color: white.

95-460
IR SENSOR WITH PULSE COUNT
Small compact infrared sensor is perfect for all applications commercial or residential. Stable circuitry for reliable operation. Optional brackets for multi-angle mounting on ceilings or walls. Available in form C relay for normally open, normally closed applications. Tamper switch provided, 35' x 35' coverage. Operates on 12Vdc.

95-464
DUAL GLASS BREAK DETECTOR
This sensor is used to protect areas which conventional sensors that have to be attached to each window, but this unit covers a specific area and uses a dual sensing technology to protect a larger area. The flex audio technology is sensitive to different frequencies. Ultra low end types generated by hard sharp blows to glass windows. The unit remains off until flex technology detects a blow to the glass. For an alarm condition to occur the audio must first detect the frequency of breaking glass within a defined time window. After the flex detects a blow to the glass, because both technologies must detect and verify glass breakage, false alarms are virtually eliminated. Indicator LED's provide visual indicators for various functions. Operates on 12Vdc.

95-600 - 6 ZONE ALARM SYSTEM WITH L.E.D. KEYPAD
95-800 - 8 ZONE ALARM SYSTEM WITH L.E.D. KEYPAD
Burglar and Fire Alarm control panels are ideal for light residential and commercial use. The small keypad with its large, illuminated tactile buttons make entering commands easy in low lighting conditions. Removable front door on control panel for easy wiring and access. Built-in power supply and digital communicator. Unit comes with (1) control panel, (1) L.E.D. digital keypad, (1) AC power transformer. Can use up to seven (95-602) alpha-numeric keypads and four (95-601) L.E.D. keypads. All options are fully programmable thru the digital keypad. Programmable entry, exit, siren delay times. UL Compliance Alarm Panel Specifications
Power Requirements 16Vac, 40VA Transformer Supplied
Battery Backup terminals provided for a 12V battery, rechargeable gel type, not supplied (Calrad part # 95-894)
Regulated Switched Auxiliary Power Supply:500mA - 800mA max, with all devices.
Siren Output: Current 2 Amps
Zones: Normally Closed and Normally Open
System Capacity: 7 alpha-numeric keypads and 4 L.E.D. keypads
Transient & Lightning Protection: Yes
Wiring Knockouts: 3/4”
Cabinet Lock: Knockout provided
Dimensions: 11"(H) x 11"(W) x 31/2"(D)
Weight 4 lbs.

LED Keypad for 95-600

95-602
L.C.D. KEYPAD
Used with the Calrad 95-600 6 zone alarm system. LCD keypad size: 6 1/2” (W) x 4 1/2”(H) x 1 1/4”(D).

95-702
15 WATT PUBLIC ADDRESS AMPLIFIER
Has inputs for microphone, auxiliary, phone, and microphone auxiliary. Also has built-in siren. Chassis size: 6”(W) x 2.75”(H) x 6.5”(D). 45-602 power supply sold separately for AC use.
Specifications:
Power Source DC 12V (11-16V standard 14.4V)
Input impedance Mic 200-50K ohm adaptable / Aux. 10K
Input Level Mic -50dB ± 1dB / Aux. -22dB ±1 dB (for rated output)
Output Impedance 4~16 ohmW
Power Consumption Less than 3A at max. output
Siren Electronic operated automatic waving type
Fog-horn Electronic fog-horn
Dimensions 155mm(W) x 150mm(D) x 65mm(H)
Weight 0.78kg

95-770
MALE AC SOCKET
Solder type, recessed male AC panel jack. 10A at 250Vac. Black plastic body. US and CSA approved. Mounts in 1.1”(W) x .74”(H) hole. Overall depth 1.25” with 1.55” mounting centers. Black plastic body.

95-724A
DIGITAL ONE CHANNEL ANNUAL EVENT TIMERS
Highly versatile 24 hour, 365 day, event timer. Designed to support a wide range of applications. Such applications include: Home and Building Automation, Security, Access Control etc. Equipped with form “C” relay contacts that provide many latching and/or momentary operations during a program schedule of your choice. The EE prom memory allows for programming of unit prior to/or during field installation. Events may be set for single or multiple operations on a daily and/or weekly schedule. The block progamming feature enables repeating an event on any combination of consecutive days. 95-724A will compensate for daylight savings time if desired. It automatically adjusts for leap year and is Y2K compatible. Individually selected holiday exceptions can be programmed to over-ride regularly scheduled events.
Specifications:
12 to 24 volts AC or DC operation
Standby current: 10mA (relay off) 50mA (relay on)
Battery charging current: 100mA
Form “C” relay contacts are rated 10amp @ 120Vac/28Vdc
EE Prom memory protects against loss of programming due to power failure
Accurate crystal controlled clock
Momentary and/or latching events
50 Individually programmed daily/weekly events
Block programming capacity can accommodate a total of 350 events per week
10 programmable holiday dates
“First man in” option
Alphanumeric LCD display simplifies programming
Standard or daylight savings time settings
Automatic compensation for leap year
Built-in charger for 12Vdc sealed lead acid or gel type batteries (max charge current 100mA)
Lithium battery backup maintains clock (optional)
User friendly programming
Board dimensions: 5.25” (W) x 3” (L) x 1” (D)

95-770-SNAP
Snap-in version, US and CSA approved Mounts in 1.025” (W) x .84”(H) hole. Overall depth .96”. Black plastic body.

95-771
FEMALE AC SOCKET
Solder type, recessed female AC panel jack. 10A at 250Vac. Black plastic body. US and CSA approved. Mounts in 1.27”(W) x .96”(H) hole. Overall depth 1.25” with 1.55” mounting centers. Black plastic body.

95-772
HEAVY DUTY INLINE MALE AC PLUG
Solder type, inline 3 conductor male AC connector. 10A at 250Vac. Black plastic body.

95-773
HEAVY DUTY INLINE FEMALE AC PLUG
Solder type,inline 3 conductor female AC connector. 10A at 250Vac. Black plastic body.

95-780
6 OUTLET HEAVY DUTY SURGE PROTECTOR WITH CORD MANAGEMENT
Comes with 6 outlets, 2 configured for power supplies and 4 standard spaced outlets. Integrated illuminated breaker switch. 14 AWG, 6 ft. grounded power cable. Built in mounting brackets and heavy duty steel housing UL/CSA approved. Color is yellow

95-781
8 OUTLET HEAVY DUTY SURGE PROTECTOR WITH CORD MANAGEMENT
Comes with 8 outlets, 3 configured for power supplies and 5 standard spaced outlets. Integrated Illuminated breaker switch. Built in mounting brackets, heavy duty steel housing. 14 AWG 6 ft. grounded power cable. UL/CSA approved. Color is yellow

95-783
6 OUTLET ADAPTER WITH SURGE PROTECTION (METAL)
1-mov, 90-joules basic protection. Resettable circuit breaker. Illuminated ON-OFF rocker switch. 4 ft., 14 awg heavy duty cord. Baked enamel ivory finish.

95-783-P (Straight AC Plug)
95-783-P-RT (Right Angle AC Plug)
6 OUTLET ADAPTER WITH SURGE PROTECTION (PLASTIC)
Provides protection against noisy AC power. MOV circuitry for reducing harmful power spikes and surges, reduces, RFI and EMI signals. On\Off power switch with 15A circuit breaker. 3 ft. 14 AWG, 3 prong AC cord. Maximum surge dissipation 59 joules. Maximum surge voltage 6000 volts. Maximum spike current 4500 amps. Response time less than 1 nanosecond. UL/CSA listed. High impact ABS plastic housing.

95-785
6 OUTLET MODEM/FAX SURGE PROTECTOR
Child protected slide outlet covers. 3-mov, 270-joules. 3 Line protection. EMI-RFI noise filtered. Built-in resettable circuit breaker. ON-OFF illuminated rocker switch. LED surge and ground fault indicator. 6 ft. 14 awg heavy duty power cord. UL/CSA listed. High impact ABS plastic housing.

95-786
9 OUTLET MODEM/TV SURGE PROTECTOR
Child protected slide outlet covers suitable for DSS dish installation. 3 transformer spaced outlets. 6-mov, 840-joules. 3 Line protection. EMI-RFI noise filtered. Built-in resettable circuit breaker. ON-OFF illuminated rocker switch. LED surge and ground fault indicator. Surge fail audible alarm alert. 6 ft. 14 awg heavy duty power cord. UL/CSA listed. High impact ABS plastic housing.

95-788
8 OUTLET DBS SURGE PROTECTOR
TV-DSS surge protector used for DSS satellite installations. 3-class 2 transformer spaced outlets. 5-MOV 1680 joules, 3 line protection EMI-RFI noised filtered up to 60dB from 100KHz to 10MHz. Protects phone/fax/modem, satellite, cable coax connections. Illuminated breaker switch. L.E.D. surge and ground fault indicator. Surge fail audible alarm alert. 6 ft. 14 awg heavy duty power cord. Max surge voltage of 6500. 5-2250Mhz premium ‘F’ connectors. Child protected slide outlet covers. High impact ABS plastic housing. UL/CSA listed. UL497A, 1993, 1449. Size: 4.5”(W) x 1.74”(H) x 11.5”(D). Color is white.

95-790
CHASSIS MOUNT AC RECEPTACLE
Solder type, 3-prong (grounding type) jack. Snap-in mounting. UL approved. 15A/125V. Mounts in 1.06”(W) x .87”(H) hole. Overall depth 1.28”. Black plastic body.

95-791
CHASSIS MOUNT AC RECEPTACLE
Solder type, 2-prong (polarized) jack. Snap-in mounting. UL approved. 15A/125V. Mounts in .95”(W) x .48”(H) hole. Overall depth 1.13”. Black plastic body.

95-792-GN Green
95-792-OR Orange
3 Way AC Grounding Wall tap.
Available in either green or orange color options.
110/125Vac, 15 amp rating.
UL listed.
Rubber Body

b>95-792-GN Green
95-792-OR Orange
3 Way AC Grounding Wall tap.
Available in either green or orange color options.
110/125Vac, 15 amp rating.
UL listed.
Rubber Body

95-793
3-OUTLET SURGE PROTECTOR
270-joules. LED surge and ground fault indicator. UL/CSA listed. 125 Vac, 15 amp rating.

95-795
AC 3 WIRE GROUND ADAPTER
120 Vac - 20 amp rating. Rubber body.

95-795-UL
POLARIZED AC 3 WIRE GROUND ADAPTER
120 Vac - 20 amp rating.
Plastic body.

95-796
SINGLE OUTLET SURGE PROTECTOR
1-mov, 90-joules. LED power indicator. 120 Vac, 15 amp, 1875 watt rating. UL listed.

95-800
8 ZONE ALARM SYSTEM WITH L.E.D. KEYPAD
Burglar and Fire Alarm control panels are ideal for light residential and commercial use. The small keypad with its large, illuminated tactile buttons make entering commands easy in low lighting conditions. Removable front door on control panel for easy wiring and access. Built-in power supply and digital communicator. Unit comes with (1) control panel, (1) L.E.D. digital keypad, (1) AC power transformer. Can use up to seven (95-602) alpha-numeric keypads and four (95-601) L.E.D. keypads. All options are fully programmable thru the digital keypad. Programmable entry, exit, siren delay times. UL Compliance.

Alarm Panel Specifications
Power Requirements 16Vac, 40VA Transformer Supplied
Battery Backup terminals provided for a 12V battery, rechargeable gel type, not supplied (Calrad part # 95-894)
Regulated Switched Auxiliary Power Supply:500mA - 800mA max, with all devices.
Siren Output: Current 2 Amps
Zones: Normally Closed and Normally Open
System Capacity: 7 alpha-numeric keypads and 4 L.E.D. keypads
Transient & Lightning Protection: Yes
Wiring Knockouts: 3/4”
Cabinet Lock: Knockout provided
Dimensions: 11"(H) x 11"(W) x 31/2"(D)
Weight 4 lbs.

95-801
L.E.D. KEYPAD
Used with the Calrad 95-800 8 zone alarm system. LED keypad size: 6 1/2”(W) x 4 1/2”(H) x 1 1/4”(D).

95-802
L.C.D. KEYPAD
Used with the Calrad 95-800 8 zone alarm system. LCD keypad size: 6 1/2”(W) x 4 1/2”(H) x 1 1/4”(D).

95-820
WATER RESISTANT DIGITAL KEYPAD
Water resistant digital keypad for door and gate access.
Operates on 12Vdc.
Dual output dry contact relays.
2A at 18Vdc, 1A at 120Vac.
Tamper proof switch.
EEprom memory, audible key beep.
1 million possible codes.
Color: white.
Size: 4.6”(L) x 2.9”(W) x .9”(D).

95-821
DOOR/GATE ACCESS DIGITAL KEY PAD
Indoor digital keypad for door entry and gate access.
Stainless steel face plate.
Operating voltage 12-14VDC.
Current consumption 10-60mA.
Relay output 5A at 30Vdc, dry contact.
Over 111 million code combinations.
Fits in a single gang opening.
Color: stainless steel finish.

GATE ENTRY KEYPAD TRIPLE LATCH

95-824
Heavy Duty Sealed Enviroment Surface Mount Weatherproof Self Contained Access Control Key pad IEI 232SE Sealed Environment Surface Mounted Weatherproof Stand Alone Access Control / Door Shunt / Timered Flush Mounted Keypad with Expanded Programming Features. Code flexibility: Codes can be 4~8 digits.

95-830 POWER AMPLIFIER
This power amplifier is a very versatile high fidelity amplifier and has many useful applications. A few of these are as follows: A power amplifier for Walkman or similar type of AM/FM stereo headphone radio, they can be converted into a high powered stereo system for home use. This can easily be done by connecting the headphone output from the radio to the input control of the amplifier. As a power amplifier for the auto, van, camper, trailer and boat, or as a portable system for outdoor use. A public address amplifier for both indoor and outdoor use.
Specifications
DC Voltage 12 to 15V
Input Sensitivity 0.6V at full output
Frequency Response 10 to 25 kHz
Power Output Mono: 15W at 8W. Stereo: 6W
Input Impedance Low Z
Distortion 1% @ full output

95-840
LOW CURRENT RELAY MODULE
This unit switches a set of dry contacts DPDT rated at 5 amps @250Vac, 30Vdc. Supply Voltage, programmable 6/12/24Vdc. Current draw, 70mA when relay is active Minimum pull voltage +/- 20% of operating voltage. LED power indicatgor. Mounts with foam tape.

95-845
MULTIMODE PRECISION DIGITAL TIMER
Digital timer .01 seconds to 2550 hours (106 days). Operates at 10-15Vdc. Dry contact relay output, N/O, N/C @ 2A. Select timing modes by dipswitch. Multiple timing operations. Delay on break, delay on make, single shot interval timer, ON/OFF recycle.

95-846
DIGITAL TIMER
For use with security & gate entry systems, or can be used to control a set of dry contacts with a momentary positive or negative trigger. Time is adjustable from 2-45 sec. Works with AC or DC power. Built-in LED power indicator.
Specifications
Operating voltage 12-24 Vac, Vdc
Current consumption relay triggered 50 mA
Dry contact rating 3 amps

95-847B
UNIVERSAL TIMER
This unit can be used for many applications such as a dialer trip delay, bell shutdown timer or exit delay. Features: 1 Sec to 15 Min. adjustable. Relay output (N/C/NO). Low power drain. Transient protected. Voltage reversal protected. Auto reset. Totally enclosed package. Small size.
Specifications
Input Voltage 11 to 13 Vdc
Operating Temperature 32° to 100° F.
Program Time 1 Sec to 15 Min.
Dimensions 1.6" (L) x 2"(W) x 1.5"(H)
Operating Current (Relay activated) .040 amp.
Mounting Area 3.6 sq. in.
Operating Current (Relay de-activated) .010 amp.
Weight 0.15 lbs.
Relay Contact Rating - Voltage 50 V ac/dc
Relay Contact Rating - Current 2 amps

Mini 1-60 Sec TimerModule N.O./N.C. Trigger

95-850
ELECTRONIC DOOR RELEASE UNIT
Operates on 10-14Vdc. Current draw 800mA. DC coil resistance 14 ohms. Comes with mounting screws. Mounting plate 6.25” x .99”. Coil body 3.5”(H) x 8”(W) x 1.1”(H).
Overall depth 1.25”.

95-869B
6-WATT AUDIO AMPLIFIER MODULE
Solid-State Audio Amplifier Module with max 5 watt output.
Specifications
Power Supply Voltage 12-15 V
Frequency Response 10 to 25 KHz.
Input Impedance Low Z
Input Sensitivity 6 mv.
Power Input Mono 6 W., 8W
Distortion 1% @ full output

60WATT PUBLIC ADD.AMPLIFIER

6 Inch 24Vdc Security Bell

6 Inch 24Vac Security Bell

8 Inch 12Vdc Security Bell

95-889
ALARM SIREN
Operated from 6 to 12 Vdc. Siren is designed to produce a wobble type sound electrically with amplifier contained in housing. Output is approximately 124 dB ±2 dB, 12 Vdc, with sound pressure meter 10 ft. away. Rated operating current 1 Amp ±0.2 Amp at 12 Vdc. Color: black.

95-890
SELF-CONTAINED SIREN SPEAKER
High-powered, compact siren speaker. Produces loud, ear-piercing warble or steady tone. Operates on either 6 or 12 volts DC and draws only 400 mA of current. Easy-mounting and weather resistant.
Color: white.
Size: 4”(L) x 4”(W) x 2”(D).

95-893
POWER SUPPLY 12 VDC, 7 AMP HR.
Complete with charger board, 16Vac plug-in transformer, 12Vdc LEAD-ACID Rechargeable Battery. Fuse Protected. Automatic Full Charge Shutdown. Voltage Reference Indicator. 12 Volt, 7.8 amp hour battery available separately.

95-894
12 VOLT, 7 AMP BATTERY
Lead-acid, sealed rechargeable battery. Replacement battery for Calrad 95-893 power supply. Weight: 5.8 lbs. Size: 6”(W) x 2.5”(D) x 3.5”(H).

95-898
BURGLAR ALARM MODULE
Versatile, low cost, solid-state control module with full relay power output. Excellent protection for the home, office, apartments, condominiums, etc. Easy to install. Features closed and open circuit loops. Built-in 3 to 11 minute adjustment reset timer. Will automatically reset if protective loop has been closed. The loops may be armed or disarmed anytime by a key switch. Operates on 6–12 Vdc.

95-900
ELECTRONIC DUAL BEEPER HORN
Produces penetrating continuous or pulsating tone. Will operate on either 6 or 12 Vdc. Used in many alarm warning devices. Small in size, mounts into 11/8" hole. Color: black.
Size: 1”(H) x 1.5” (dia).

95-902
ELECTRONIC BEEPER HORN
Highly advanced, small in size, low in power consumption. Used in many alarm warning devices.
Specifications
Voltage 2 to 24 Vdc
Power Output 93 dB at 12 Vdc
Current 20 mA max
Size fits into 11/16" hole or mount 15/16" centers
Starting Voltage 1.0V max
Color Black
Size 1”(H) x 1” (dia).

95-904
24-HOUR PANIC & FIRE CONTROL MODULE
By adding this module to either the Calrad 95-898, 95-899 alarms, or any other standard control center, you can have a 24-hour panic override switching circuit, even though your alarm is on or off. When triggered, this control will activate either the alarm bell, siren or another independent alarm device. May also be used for non-supervised open circuit heat detection.

95-906
PRESSURE SECURITY MAT
Designed to give faultless service, extra thin, made of black PVC plastic, can be placed under existing rugs, mats, etc. Copper bus is used to connect each segment together and is timed for long use. Size: 29"W x 21"L.Normally open.

95-908
STAINLESS STEEL REMOTE KEY STATION
Remote key station single gang plate, features key switch, circuit test button and red, green indicator, LED lights—to be used with 95-898 or 95-899 alarm module.

95-909
SINGLE GANG STAINLESS STEEL
Single gang plate with .75” "D" hole and red, green LED's, 6 Vdc or 12 Vdc operation. Use with Calrad 40-663HS, 40-682, or 40-683 key switches.

10 12Vdc Alarm Bell 85db

95-914
ELECTRONIC LATCHING RELAY
Momentary input, latching output. Converts old style shunt panel to new multi-key system. Use to shunt an interior loop. Use as a lock-out on commercial systems. Programable 6/12/24Vdc, SPDT relay with two (2) LED indicator outputs.

95-923
Programable Timer
Perfect for use with a variety of timed security and access control operations such as door unlock timing, siren, bell timer or VCR/DVD timer. Auto-sensing of input voltage and DIP switches for programming make for easy installation. Time adjustable from 1 second to 60 minutes. AC/DC usage.
Specifications
Operating voltage 12- 24 Vdc
Current consumption relay triggered 50 mA
Dry contact rating 8 amps
Energized ............................................50 mA
Stand by...............................................1 mA

95-925
12 Volt SPDT ALARM RELAY
30/40A contacts. Current draw 120mA. Coil resistance 93 ohms DC. Can be used with Calrad 95-926 or 95-927 relay sockets.

95-926
SINGLE RELAY SOCKET FOR CAR ALARMS
Mates with 95-925 12V relay.

95-927
DUAL RELAY SOCKET FOR CAR ALARMS
Mates with 95-925 12V relay

95-960
Twin photobeam detectors
Fixed dual beam infrared pulsed perimeter detectors. Range 320’ indoors, 160’ outdoors. Excellent immunity to freezing, snow, rain, fog, and other bad weather conditions. Antifrost design, operates with frost or dew without false alarms. Interruption time adjustable for nearly all situations. N/C tamper switch included. Power input 10-24Vdc.

CCTV BNC Balun with Audio or PTZ Video Power over a single UTP cable.
Screw terminals for Audio or PTZ (Pan-Tilt-Zoom, RS422/RS485) and screw
terminals or BNC male connector for video, 2.1mm coax power jack for power.
Transmission distance up to 2000 ft., Includes 6” DC power pigtail cable with 2.1mm plugs. Size: L-2” x W-1”x H-.75”.

95-1039
Transmit video, power and RS422 or RS485 Data over one standard CAT 5 cable.

(SOLD INDIVIDUALLY) Composite Video Balun System

Supports 480i, 480p, 720p, 1080i, 1080p
Steel Chassis
Transmit composite video and L+R analog audio up to 1000’ over UTP cat5e or cat6 cable. 3 x RCA female jacks to RJ45 female jack.

Units sold individually,
2 pieces required.
Non-directional signal use.
Size: Length 3.5” x Width 2.2” x Height 1”.

Technical Note: Using adapters, the composite video jack can be used to deliver IR as well. Use Calrad 75- adapter for CCTV use.

(SOLD INDIVIDUALLY) HDTV Video Balun System

3 BNC Connectors for Component Video
Video (RGB) balun is designed to transmit Red, Green and Blue (RGB) video signals over CAT 5E/6 UTP cable. Internal inductors and filters ensure stable video signal transmission over UTP cable up to 1000 ft. for a 640 X 480 resolution.

Units sold individually,
2 pieces required.
Non-directional signal use.

Specifications:
Interface video (R) One BNC Female for RED signal Interface video (G). One BNC Female for GREEN signal Interface video (B) One BNC Female for BLUE signal Interface UTP One RJ45 for RGB signal RJ45 pair 4 (pin 7, 8) RED signal Impedance video. 75 ohm unbalanced RJ45 pair 3 (pin 3, 6) GREEN signal impedance RJ45 100 ohm balanced RJ45 pair 2 (pin 1, 2) BLUE signal video bandwidth DC to 30MHz.

Color: black.Size:
Length 3.5” x Width 2.2” x Height 1”.

(SOLD INDIVIDUALLY)HDTV Video Balun System

3 RCA Connectors for Component Video and 95-1044-BNC HDTV Video Balun System Video (RGB) balun is designed to transmit Red, Green and Blue (RGB) video signals over CAT 5E/6 UTP cable. Internal inductors and filters ensure stable video signal transmission over UTP cable up to 1000 ft. for a 640 X 480 resolution. Units sold individually, 2 pieces required. Non-directional signal use.

Specifications:
Interface video (R) One RCA Female for RED signal Interface video (G). One RCA Female for GREEN signal Interface video (B) OneRCA Female for BLUE signal Interface UTP One RJ45 for RGB signal RJ45 pair 4 (pin 7, 8) RED signal Impedance video. 75 ohm unbalanced RJ45 pair 3 (pin 3, 6) GREEN signal impedance RJ45 100 ohm balanced RJ45 pair 2 (pin 1, 2) BLUE signal video bandwidth DC to 30MHz.

Color: black.
Size: Length 3.5” x Width 2.2” x Height 1”.

(SOLD INDIVIDUALLY) Audio & video balun cat-5 cable system

Transmit stereo audio and composite video up to 1000 ft using CAT-5e cable. The advantages of the system are: clear video signal, fewer cables to manage, lowercost per connection, centralized wiring for greater control.
Video bandwidth 12MHz,
Audio 20Hz-15KHz.
Two units required for transmission and reception of balanced signals.
Size: 2.2” (W) x 1” (H) x 3.5” (D).

(SOLD INDIVIDUALLY) Composite Video, S-Video, Analog or Digital Audio Balun

This passive RCA Audio/Video balun is ideal for corporate A/V, schools or home theater applications. Transmit stereo audio, digital audio, composite video or S-Video over a single Cat 5/Cat 6 UTP cable up to 1000 feet. Transmission of S-Video requires the Calrad 55-741 S-video Y adapter cable sold separately.

Specifications:
RCA input Connectors: Gold plated RCA jacks X 2
RJ45 Connector : Female RJ45 jack X 1
Signal Input: Stereo Audio, Digital Audio, Composite Video, S-Video
Cable Transmission Distance: Stereo audio 2500 Feet max, Digital audio 1000 feet max
Dimensions: Length: 2.4” X Width: 1.69” X Height .865”

Composite Video + L, R Audio (SOLD IN PAIR)

Calrad’s new line of audio-video baluns provide a
simple low cost method of delivering analog audio,
digital audio + video over UTP cable. 25K Gold
plated jacks, Chassis: ABS Plastic.
Size: Length 3.16” x Width 2.55” x Height 1.14”.


Supports: 480i + Stereo Audio

CCTV BNC Balun with screw terminals for use with any (UTP) twisted pair cable.
Provides transmission of real-time monochrome or color CCTV video\ signals.
Use 4 pairs of 95-1041-S baluns on a single Cat5e cable. Transmission distance
up to 2000 ft., Size: L-2” x W-1”x H-.86”.

Component Video (SOLD IN PAIR)

Calrad’s new line of audio-video baluns provide a
simple low cost method of delivering analog audio,
digital audio + video over UTP cable. 25K Gold
plated jacks, Chassis: ABS Plastic.
Size: Length 3.16” x Width 2.55” x Height 1.14”.


Supports: 480p, 720p, 1080i Specifications:
* 480p, up to 100 meters
* 720p, up to 75 meters
* 1080i, up to 50 meters
(Please Note: total length, device to device)

Component Video + Digital Audio (SOLD IN PAIR)

Calrad’s new line of audio-video baluns provide a
simple low cost method of delivering analog audio,
digital audio + video over UTP cable. 25K Gold
plated jacks, Chassis: ABS Plastic.
Size: Length 3.16” x Width 2.55” x Height 1.14”.


Supports: 480i, 480p, 720p, 1080i

1/4 RACK 45WATT STEREO AMP